LT Power Cables

SERVO FD 75781-CY

thumbnail

Application

Connecting between the frequency convertor and the motor for power circuits in machine cabling. In dry damp or wet interiors with normal mechanical stress conditions For outdoor usage within the permitted range of temperature.

Standard

Based on EN 50525-2-51

Technical Data

Nominal Voltage : UO / U 600 / 1000V

Insulation Resistance : Min. 20 GΩ x cm

Temperature Range : Flexing -5°C to +70°C. Fixed installation -30°C to +70°C

Minimum Bending Radius : Flexing 7.5 x cable ø. Fixed installation 4 x cable ø

Test Voltage : Core/core: 4000V. Core/screen: 2000V

Cable Construction

Bare copper, fine wire conductors according to EN 60228 Cl. 6,

PP(polypropylene) core insulation.

Cores are twisted together with shorter lay length.

Non woven wrapping.

Tinned copper braiding.

Special PVC TM5 outer sheath to EN 50363-4.1

PVC orange (RAL 2003).

Properties

Flame retardant according to EN 60332-1-2

Extensively Oil resistant

PP insulation ensures low mutual capacitance, lower dielectric loss, low screen interference currents.

Low adhesive surface

SERVO FD 75781-CY is also available with UV resistance property as SERVO FD 75781-CY UV.

Kindly add 'UV' after the part no. for UV resistant cable.

UV resistant to ASTM G 154.

Cable Design Parameters

Kindly complete the part numbers for these cables by adding the suffix (in place of ‘y’) for the insulation material required: 1 – PVC 70°C, 9 – TPE

Part Number No. of Cores & Nominal Cross Sectional Area(Sq. mm) Approx. Cable Diameter (mm) Approx. Copper Weight (kg/km) Approx. Cable Weight (kg/km)
041000411105 4G 1.5 9.8 74.3 130
041000411205 4G 2.5 11.9 113.8 205
041000410004 4G 4 13.5 169.7 286
041000410010 4G 10 19.7 428.0 641
041000410016 4G 16 23.9 661.4 931
041000410035 4G 35 33.3 1386.2 1808
041000410050 4G 50 38.3 1937.2 2476

Note : * G = With green / yellow earth core